9 Cables de energía para baja tensión | Low voltage power cables PRYSMIAN PRYSOLAR - H1Z2Z2-K Tensión asignada | Rated voltage: 1,0/1,0 kV (1,2/1,2 kVac máx.) (1,8/1,8 kVdc máx.) Norma diseño | Design standard: UNE-EN 50618 / IEC 62930 Designación genérica | Generic designation: H1Z2Z2-K Construcción 1. Conductor Metal: cobre recocido estañado. Flexibilidad: flexible, clase 5, según UNE EN 60228. Temperatura máxima en el conductor: 90 ºC (120 ºC, por 20 000 h). 250 ºC en cortocircuito. 2. Aislamiento Material: compuesto reticulado libre de halógenos según tabla B.1 de anexo B de EN 50618. 3. Cubierta Material: compuesto reticulado libre de halógenos según tabla B.1 de anexo B de EN 50618. Colores: negro o rojo. Aplicaciones Especialmente diseñado para instalaciones solares fotovoltaicas interiores, exteriores, industriales, agrícolas, fijas o móviles (con seguidores...). Pueden ser instalados en bandejas, conductos y equipos. Especialmente resistente a la acción del agua (AD8 + test especial para corriente continua WET-I 1500), en instalaciones subterráneas bajo tubo o conducto. Indicado para el lado de corriente contínua en instalaciones de autoconsumo solar fotovoltaico. Sistemas de corriente continua (ITC-BT 53 ,UNE-HD 60364-7-712). Structure 1. Conductor Metal: tinned annealed copper. Flexibility: flexible, class 5, as per UNE EN 60228. Maximum conductor temperature: 90 ºC (120 ºC, for 20 000 h). 250 ºC in short circuit. 2. Insulation Material: halogen-free cross-linked compound as per table B.1, Annex B, EN 50618. 3. Sheath Material: halogen-free cross-linked compound as per table B.1, Annex B, EN 50618.Colours: black or red. Applications Specially designed for indoor, outdoor, industrial, agricultural, fixed or mobile (with trackers...) solar photovoltaic installations. They can be installed in trays, conduits and equipment. Especially resistant to the action of water (AD8 + special test for direct current WET-I 1500), in underground installations in pipes or conduits. Suitable for the direct current side in photovoltaic solar self-consumption installations. Direct current systems (ITC-BT 53, UNE-HD 60364-7-712). Datos técnicos | Technical data Número de conductores x sección Number of conductors x cross-section (mm2) Diámetro máximo del conductor Maximum conductor diameter (mm) (1) Diámetro exterior del cable (valor máximo) Cable outer diameter (max.) (mm) Radio mínimo de curvatura dinámico Minimum dynamic bending radius (mm) Radio mínimo de curvatura estático Minimum static bending radius (mm) Peso Weight (kg/km) (1) Resistencia del conductor a 20 ºC Conductor resistance at 20 ºc (W/km) Intensidad admisible al aire Permitted current surface-mounted (2) (A) Intensidad admisible al aire. T ambiente 60 ºC y T conductor 120 ºC Permitted current surface-mounted. Ambient t 60 ºc & conductor t 120 ºc (3) Intensidad admisible bajo tubo enterrado Permissible current in condult and buried (4) (A) Caída de tensión Voltage drop (V/A km) (2) 1 x 1,5 1,8 5,4 22 16 33 13,7 24 30 24 27,4 1 x 2,5 2,4 5,9 24 18 45 8,21 34 41 32 16,42 1 x 4 3,0 6,6 26 20 61 5,09 46 55 42 10,18 1x 6 3,9 7,4 30 22 80 3,39 59 70 53 6,78 1 x 10 5,1 8,8 35 26 124 1,95 82 98 70 3,90 1 x 16 6,3 10,1 40 30 186 1,24 110 132 91 2,48 1 x 25 7,8 12,5 63 50 286 0,795 140 176 116 1,59 1 x 35 9,2 14,0 70 56 390 0,565 182 218 140 1,13 1 x 50 11,0 16,3 82 65 542 0,393 220 276 166 0,786 1 x 70 13,1 18,7 94 75 742 0,277 282 347 204 0,554 1 x 95 15,1 20,8 125 83 953 0,210 343 416 241 0,42 1 x 120 17,0 22,8 137 91 1206 0,164 397 488 275 0,328 1 x 150 19,0 25,5 153 102 1500 0,132 458 566 311 0,264 1 x 185 21,0 28,5 171 114 1843 0,108 523 644 348 0,216 1 x 240 24,0 32,1 193 128 2304 0,0817 617 775 402 0,1634 (1) Valores aproximados. (2) Instalación monofásica o corriente continua en bandeja perforada al aire (40 ºC). Con exposición directa al sol, multiplicar la corriente por 0,85. XLPE2 con instalación tipo F columna 13. (UNE-HD 60364-5-52 e IEC 60364-5-52). (3) Instalación de conductores separados con renovación eficaz del aire en toda su cubierta (cables suspendidos). (4) Instalación bajo tubo enterrada con resistividad térmica del terreno estándar de 2,5 K·m/W y temperatura del terreno 25 ºC. XLPE2 con instalación tipo D1 (Cu) (monofofásica o continua). Temperatura ambiente 60 ºC (a la sombra) y temperatura máxima en el conductor 120 ºC. Valor que puede soportar el cable, 20 000 h a lo largo de su vida estimada (30 años). (1) Approximate values. (2) Single-phase or direct current installation in a surface-mounted perforated tray (40 ºC). With direct exposure to the sun, multiply the current by 0.85. XLPE2 with installation type F column 13. (UNE-HD 60364-5-52 and IEC 60364-5-52). (3) Installation of separate conductors with efficient air renewal throughout their sheath (suspended cables). (4) Under-pipe buried installation with standard soil thermal resistivity of 2.5 K-m/W and a soil temperature of 25°C. XLPE2 with installation type D1 (Cu) (single-phase or continuous). Ambient temperature of 60°C (in the shade) and a maximum conductor temperature of 120°C. Value that the cable can withstand, 20 000 h over its estimated life (30 years).
RkJQdWJsaXNoZXIy MjY3Mzk=